Wire foam cutting technology is a cutting technique that uses an electrically charged metal wire to cut through a variety of foam materials. Wire foam cutting technology is widely employed in a wide range of areas due to the accuracy of the latest wire foam cutter, which provides such a perfect cut. It’s not uncommon to see this technology employed in the fabrication of foam movie sets, architectural foam trim, and even concrete foam molds. Whatever application you have for wire foam cutting technology, you will be able to find a machine that meets your requirements. Because every wire foam cutter works with an electrically charged wire, there is far less mess than when cutting, sanding, rasping, or filing. At the same time, the user has access to a considerably higher level of accuracy and precision. As the foam passes through, wire foam cutters virtually dissolve it, leaving you and your workspace dust-free. wire foam cutters have an amazing versatility and may be used for a wide range of applications thanks to this combination. While there are many wonderful options to try for any forthcoming project, it’s critical to select the right tool for the job. A tool to cut through the foam is a must-have for any serious craftsman. Foam cutting can be made easier with the use of a variety of instruments.
You can read down below the necessary information that you need when it comes to using wires as your wire foam cutters.
Foam Cutting Tools
Styro Cutter
First and foremost, the styro cutter will be extremely user-friendly. This equipment is made comprised of a wand with a heated needle that warms up and cuts through most types of foam with ease. This is a piece of low-maintenance equipment because all that is required to keep it running for as long as possible is a simple wash down of the heating needle with a sponge after each use to prevent blackening. Using a piece of cardboard and threading the hot needle through it to get any pieces of Styrofoam off the needle before it cools is another option for cleaning. This is important in any case since foam is constructed of synthetic components that solidify and will not come off once they cool. For carving portions out of a larger block of foam, the styro cutter is appropriate. Writing letters, making a design, or carving small sections out of your Styrofoam block are all examples of this. Heating needles with a diameter of roughly 2.0 mm are ideal for fine work.
Hot Wire Cutter
Because it has a wand and a heating element, the hot wire cutter is very similar to the styro cutter. This tool, on the other hand, usually has two heating needles that form a half-circle or Y-shape. A wire with a radius of roughly 0.25 mm connects the two sides. This wire heats up, allowing you to make bevels or designs in your foam. This tool makes carving or slicing your material simple and convenient. The wire does deteriorate with time and can break. It is, however, simple to replace in only a few steps. The flexibility to adjust the collars down the heating needles is another wonderful advantage of these wire cutters.